Introduction:
It is mainly suitable for continuous vertical lifting of powdery, granular and small pieces of materials. It can be widely used in the lifting of bulk materials in feed mills, flour mills, rice mills, oil mills, starch mills, grain depots, ports and docks of various sizes.
Features:
1. The reinforced cylinder with multi-layer bite edges pressed by special molds has high strength and good sealing;
2. The surface of the driving head wheel is coated with glue to reduce slippage; reinforced tensioning device;
3. Enhanced spare bucket belt and wear-resistant bucket;
4. Adjustable reflux device;
5. Anti-reverse check valve.
Model | Specs | Transmission ratio | Bucket belt speed（m/s） | Capacity（t/h） | ||
Powder | Granules | Powder（r=0.43） | Granules（r=0.75） | |||
TDTG26/13 | DQ1311 DS1311 | 9-23 | 0.8-1.2 | 1.2-2.2 | 1.2-2 | 6.5-9.5 |
TDTG26/18 | DQ1814 DS1814 | 9-23 | 0.8-1.2 | 1.2-2.2 | 2-4.5 | 15-20 |
TDTG26/23 | DQ2314 DS2314 | 9-23 | 0.8-1.2 | 1.2-2.2 | 5-8 | 16-25 |
TDTG36/13 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 2-3 | 8-12 |
TDTG36/18 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 4.5-6 | 16-17 |
TDTG36/23 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 7-10 | 20-32 |
TDTG36/28 | DQ2816 DS2816 | 9-23 | 1.2-1.6 | 1.6-3 | 8-11 | 25-40 |
TDTG40/18 | DQ1814 DS1814 | 9-23 | 1.3-1.8 | 1.8-3.3 | 5-7 | 22-34 |
TDTG50/23 | DQ2314 DS2314 | 11-29 | 1.3-1.8 | 1.7-3.4 | 8-12 | 30-50 |
TDTG50/28 | DQ2816 DS2816 | 11-29 | 1.3-1.8 | 1.7-3.4 | 9-13 | 40-65 |
TDTG60/32 | DQ2817 DS3116 | 13-29 | 1.5-2 | 1.8-3.5 | 25-35 | 45-70 |
TDTG60/38 | DQ3823 DS3621 | 13-29 | 1.5-2 | 1.8-3.5 | 27-38 | 90-140 |
TDTG60/46 | DQ4723 DS4621 | 13-29 | 1.5-2 | 1.8-3.5 | 32-45 | 120-200 |
TDTG80/46 | DQ4723 DS4621 | 16-35 | 1.7-2.6 | 2.1-3.7 | 36-58 | 140-240 |
